NEWS

Providing high-performance gear hobbing machines to global customers

2021/02/14

Analysis of the key factors of gear hobbing machine casting and processing

Gear hobbing machine is the most widely used machine tool among gear processing machine tools. Gear hobbing machines can cut spur and helical cylindrical gears, as well as worm gears and sprockets.


2021/01/30

Application of CNC gear hobbing machine in wind power industry

When it comes to CNC gear hobbing machines, we will actually notice that, looking at it itself, it is actually a piece of equipment with a relatively high technical content and a relatively complex structure.


2021/01/15

How much do you know about the development and application of high-speed gear hobbing machines?

With the rapid development of social economy and the continuous advancement of modern society, the mechanization level of all walks of life in society continues to improve.


2020/12/31

CNC gear hobbing machine: introduction to daily use and maintenance

When the CNC gear hobbing machine is milling gears, the height between the bottom surface of the blank and the workbench cannot be lower than the normal height of the CNC gear hobbing machine.


2020/12/16

Explain the areas in which gear hobbing machines can be used

A gear hobbing machine is a gear processing machine that uses hobs to process spur gears, helical gears, and herringbone cylindrical gears and worm gears based on the generation method.


2020/12/01

Safety operating procedures for high-speed gear hobbing machines

Suitable for batch, small batch and single-piece production of cylindrical helical gears and worm gears. It can also perform roll cutting on Huajian shafts with a certain parameter range;


2020/11/16

Daily cleaning of CNC gear hobbing machine

CNC gear hobbing machine is a widely used machine tool among gear processing machines. It can cut spur and helical spur gears, as well as worm gears and sprockets.


2020/11/01

Adjustment steps of CNC gear hobbing machine

Before debugging, please pay attention to check the parts related to processing: such as toolbar, tool boss, mandrel, whether the positioning end face runout of the tool meets the processing requirements


2020/10/20

Common problems and solutions when using gear hobbing machines

The gear hobbing machine must insist that the direction of hobbing motion is the same as the tooth direction of the gear to be cut, but because the hobbing teeth are located on a spiral line


2020/10/19

How to correctly maintain the CNC gear hobbing machine manipulator

During use, maintenance methods for CNC machine tool manipulators should be appropriately implemented. Only precise maintenance methods are required to extend the service life.


< 12 >